 오퍼게시판 |
|
|
 |
|
|
 |
제 목:
|
electronic sealant |
|
상품분류: |
접착제
|
|
등록분류: |
Offer to Sell |
|
내용: |
Payment: T/T or L/C
Additional_detail: Moldproof and flame retardant
electronic sealant series:
Applied field:
Washing machine electric water-
heater,microwave oven,inducion
cooker,fridge,intelligent
tool,electromo-bile,pulse
combustion,etc that include kinds
of intelligent microcomputer
control board,cable joint,printed
circuit board,filter,IC
controller,voltage
changer,inductor,noise rejector
and so on.
Usage:
The product is divided into two
components A and B.A is pale
white liquid an B is light yellow
transparent liquid.A and B can
store for long term
separately.Keep A and B at the
ratio of 50 to 100,and mix them
uniformly.After defoaming,the
sealing process can be carried
out.The primary solidification is
about 40 minutes.
Characteristic:
I:room solidification,either
manual or mechanical sealing is
ok.
II:good adhesive power to
metal,plastics,glass wood,etc.
III:excellent mold proof and
flame retardant ability.
IV:good stability,up to bis-
hundred experiment.
V:environment friendly,non-VOC
and up to WEEE and RoHS.
VI:repairable,PCB can be checked
when needed.
Function and Performance:
I:excellent moldproof and water
proof ability.Born to boiling
waterover 100hrs.
II:good shockproof,it is elastic
and can absorb shock energy
effectly.
III:dustproof,its thickness can
up to your request.
IV:highest grade moldproof
performance.
V:flame retardant,prevent
electric spark from PCB.
VI:non-conductive,has no bad
effect to the performance of the
control board.
Technological specification:
Flame retardant(vertical
firing):94V-0 Shore
hardness: 273A
Moldproof:0
Volume resistivity: 5.01010Ω.M
Tensile strength:
0.8Mpa Dielectric
strength: 22.12MV/m
Breaking elongation
ratio:103% Dielectric
constant: 4.0106Hz
Water
absorbing:0.08%
Dielectric loss: 9.2104Hz
Pack and storage:
Galvanized lron drum,20kg/drum
Keep in ventile,dry,shady and
cool place.
Transportation:
Non-dangerrous good,take itas
usual chemicals.
Notice:
I:bth A and B must be in
appropriate quantity.Mix them
uniformly.If envelop PCB
manually,please use it one-off.
II:If A and Bare left after
opende,screw its lid in tightly.
|
연락처 |
| 담
당 자: |
Nicole Yan |
| 전화번호: |
0531-87972518 |
| 팩스번호:
|
0531-87970819 |
| E - mail: |
cx@chenxuchem.com |
|
현재위치
: Home > Trade 
