 오퍼게시판 |
|
|
 |
|
|
 |
제 목:
|
cone crusher ,crusher |
|
상품분류: |
무기화학원료와 광물
|
|
등록분류: |
Offer to Sell |
|
내용: |
Additional_detail: Cone crusher is suitable to crush
various kinds of ores and rocks
of medium or above medium
hardness. Compare with jaw
crusher, cone crusher is of
stable structure, high
efficiency, easy adjustment, and
use economically, etc. The spring
safety system of crusher acts as
an overloading protection system
that allows metals to pass
through the crushing chamber so
as not to damage the cone
crusher. The safety system uses
dry oil and water as two kinds of
sealed formation to make plaster
powder and engine oil separated
to make surereliable performance.
The type of crushing chamber
depends upon the size of feeding
and fineness of the crushed
product. The standard type(PYB)
is applied to medium crushing,
the medium type is applied to
medium or fine crushing and the
short head type is applied to
fine crushing.
Working Principle of Cone Crusher:
Cone crusher crushes materials by
the working surface between the
movable cone and fixed cone. So
it is more advanced and
efficiency than jaw crusher. The
movable cone is supported by
spherical bearing and fixed on an
hanging erect shaft which is set
in the eccentric sleeve, and the
sleeve is set on the stopping and
pushing bearing. The movable cone
and erect shaft are drived by the
eccentric shaft sleeve together.
The eccentric shaft sleeve is
driven by horizontal shaft and
fimbriated gear, and the wheel of
the conveyor belt is drived by
motor through v-belts.The lower
part of vertical shaft is
installed in the eccentric
sleeve. When the eccentric sleeve
rotates, there is a conical
surface lined out by the shaft.
When the movable cone comes near
the fixed cone, rocks are grinded
into pieces, when the cone
leaves, grinded materials is
discharged from the diacharge
hole. The fixed cone can be
ascended or descended by
adjusting setting to adjust the
width of discharge hole,
consequantly the output size is
determined.
Models: PYB600 ~ PYB2200,
PYD600 ~ PYD2200, PYZ900 ~
PYZ2200
Max input(mm): 35~300
Adjusting range of output (mm):
3~60
Capacity(t/h):12~1000
Electric motor power (kw): 30~260
Weight(t): 5~81.4
Overall dimensions (LWH) (mm):
280013001700, 305016402350,
400019002980, 487038004192,
542043004870
Notice: Any change of technical
data shall not be advised
additionally.
|
연락처 |
|
현재위치
: Home > Trade 
